TANDBERG 7000 MXP - Manual (Page 39)

General Use
39
3.2.6 Number and Letter keys
Pressing a number key when you are outside a call will take you to the call menu. When you are
in a call, the number keys are used for Camera Presets. Press a number and you go to the
corresponding Camera Preset (see 3.10.4
Camera Presets ). However, when you are in an input
field where numbers are required, the system automatically goes to number mode and you can
dial numbers with the number keys as usual.
When you are in an input field where letters are required, the system automatically goes to letter
mode. Writing letters works like on a mobile phone. Press the key that corresponds to your
desired letter. Press the key as many times as you need to get the right letter. Change to lower or
back to upper case letters with the a/A key, and space with the 0 _ key.
To write numbers in a text input field, press the button through all the letters. Press once more
and the number will appear.
Example: How do I write "System 123" in the System Name input field (in General in
Administrator Settings)?
Press the 7-key four times to get an "S".
Press the #-key once to switch between upper case and lower case letters.
Press the 9-key three times to get a "y".
Press the 7-key four times to get an "s".
Press the 8-key once to get a "t".
Press the 3-key twice to get an "e".
Press the 6-key once to get an "m".
Press the 0-key once to get space.
Press the 1-key three times to get a "1".
Press the 2-key four times to get a "2".
Press the 3-key four times to get a "3".