TANDBERG 7000 MXP - Manual (Page 45)

General Use
45
3.5.1 Place Video Call
In the Make a Call menu enter the Dial Number either:
1. Manually, or
2. Select the book symbol in order to display the Phone Book and select a conference
participant, see 3.9 Phone Book for details.
When dialing manually, toggle between ABC/abc by pressing the # button on the remote control
and between abc/123 by holding the # button for one second. Use a star as separator in IP
addresses. If a system is registered on a gatekeeper or border controller with DNS support, there
are several ways to call into the system:

<IP address>

<E.164>

<H.323 ID>

<H.323 ID>@<domain>

<E.164>@<domain>
See 4.8.6.2
H.323 Settings for details.
Place the call by either:
1. Press OK on the remote control so that the Place Video Call icon is selected, and press
OK once again, or
2. Use the arrow button on the remote control to select the Place Video Call icon and press
OK, or
3. Press the green call button on the remote control.
Note that the call will be set up as a telephone call if the Call Type in Call Settings is set to
Telephone Call. See 4.4.6
Default Call Settings for more details.