Tyan Computer THUNDER N3600T - Manual (Page 12)

12
http://www.TYAN.com
2.03 – Jumper settings
Jumper Function Settings
*JP1
Onboard SAS Disable Jumper (for
S2937WG2NR only)
See Section 2.04
JP2 OPMA card support select header See Section 2.05
JP3 Clear CMOS See Section 2.06
J2 USB Front Panel Header See Section 2.07
J26 Front Panel Header See Section 2.08
COM2 COM2 Header See Section 2.09
IPMB IPMB connector See Section 2.10
JP9/JP10 LAN1/ LAN2 Enable/ Disable Jumper See Section 2.11
JP11 TPM Enable/ Disable Jumper See Section 2.12
JP8 Onboard VGA Enable/ Disable Jumper See Section 2.13
CPU FAN1/2 CPU1 & CPU2 FAN Header See Section 2.14
SYS FAN
1/2/3/4/5/6/7
System FAN Headers See Section 2.15
J15 TYAN Front Panel 2 for Barebone See Section 2.16
J113 LCD Module Header for Barebone See Section 2.17
J111 Fan connector for Barebone See Section 2.18
JP7 ID LED Header for Barebone
J118 SAS Fault LED header for Barebone
J116
4-Pin Power connector for TYAN riser
card M2061