Tyan Computer THUNDER N3600T - Manual (Page 51)

3.4.2 Integrated Devices
This section allows you to configure Integrated Devices.
USB Control
Enable/disable USB controllers.
Options: Disabled / USB1.1 + USB2
USB BIOS Legacy Support
Enables or disables support for USB keyboards or mice. (Enable for use with a
non-USB aware Operating System such as DOS or UNIX)
Options: Disabled / Enabled
SATA0 / SATA1 / SATA2 Controller
Enable/disable First Serial ATA Device.
NOTE: Mobile platform, enable SATA, SAVE and EXIT BIOS SETUP. Then must
do a power cycle during next POST.
Options: Enabled / Disabled
SAS Controller
Enable/disable integrated LSI1068E SAS controller.
Options: Enabled / Disabled
Interrupt Mode
Select interrupt mode between 8259/PIC mode or APIC mode.
Options: PIC / APIC