Tyan Computer THUNDER N3600T - Manual (Page 38)

38
http://www.tyan.com
2.27 – Installing the Power Supply
There are three power connectors on your S2937. Tyan recommends that you
have an EPS12V power supply which has one 24-pin, one 8-pin and one 4-pin
power connectors.
PWR2: 2x2 pin power
Connector
PWR1: 8-pin EPS 12V
power connector
PWR0: 24-pin power
connector
Applying power to the board
a. Connect the EPS12V 8-pin power connector.
b. Connect the EPS12V 24-pin power connector.
c. Connect the EPS12V 4-pin power connector.
d. Connect power cable to power supply to power outlet
NOTE
YOU MUST unplug the power supply from the wall outlet before
plugging the power cables to motherboard connectors.
8-pin
PWR
4-pin
PWR
24-pin
PWR