Tyan Computer THUNDER N3600T - Manual (Page 57)

57
http://www.tyan.com
3.4.5 I/O Device Configuration
This setting allows you to select the I/O Device Configuration.
Serial Port A
Configure Serial Port A using options:
[Disabled]: no configuration
[Enabled]: user configuration
[Auto]: BIOS or OS chooses configuration
[OS Controlled]: displayed when controlled by OS
• Options: Disabled / Enabled / Auto
Base I/O Address
Set the base I/O address for Serial Port A.
• Options: 3F8 / 2F8 / 3E8 / 2E8
Interrupt
Set the Interrupt for Serial Port A.
• Options: IRQ3 / IRQ4
Serial Port B
Configure serial port B using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled / Auto