Tyan Computer THUNDER N3600T - Manual (Page 60)

60
http://www.tyan.com
3.4.7 Console Redirection
This setting allows you to configure Console Redirection.
COM Port Address
If enabled, it will use a port on the motherboard.
Options: Disabled / On-board COM A / On-board COM B
Baud Rate
Enables the specified baud rate.
Options: 300 / 1200 / 2400 / 9600 / 19.2K / 38.4K / 57.6K / 115.2K
Console Type
Enables the specified console type.
Options: VT100 / VT100, 8bit / PC-ANSI / VT100+ / VT-UTF8 / ASCII
Flow Control
Enables flow control.
Options: Disabled / XON/XOFF / CTS/RTS
Console Connection
It indicates whether the console is connected directly to the system or a modem is
used to connect.
Options: Direct / via Modem
Continue C.R. After POST
Enables Console Redirection after OS has loaded.
Options: Off / On