TDK 3300 ICP - Manual (Page 18)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 ICP and 5220 IP Phone emulation
PN: 72-1084-02-B.doc Page 18
characters. (Use the 2 and 3 keys to access hexadecimal digits A-F, use the
Right Arrow key to advance to the next digit, and the Left Arrow key to
backspace.) For 40-bit keys you will need to enter 10 digits, for 128-bit
keys you will need to enter 26 digits. The display will scroll as needed.
Rotation Secret : This is used for proprietary WEP key rotation. Refer to your
custom document if this feature is supported in your system.
Cisco FSR (Fast Secure Roaming) In order to provide the highest level of security
without compromising voice quality on Cisco Aironet wireless LAN access points,
SpectraLink and Cisco Systems have cooperated to implement the Fast Secure Roaming
mechanism. FSR is designed to minimize call interruptions for Wireless Telephone users
as they roam throughout a facility. Existing Aironet 350, 1100, and 1200 APs may
require a firmware upgrade to support FSR. Cisco FSR requires advanced configuration
of the Cisco access points in your site. See your Cisco representative for detailed
documentation on configuring your access points and other required security services on
your wired network. To configure Cisco FSR in your Wireless Telephone, you must
enter a Radius Server username and password into each phone.
Username: Enter a username that matches an entry on your Radius server.
Usernames are alphanumeric strings, and can be entered using the alphanumeric
string entry technique.
Password: Enter the password that corresponds to this Username.
OAI On/Off
SpectraLink’s Open Application Interface (OAI) enables third-party computer
applications to display alphanumeric messages on the Wireless Telephone display and
take input from the Wireless Telephone keypad. Refer to the Open Application Interface
(OAI) Specification (Version 1.2) documentation for information about administering the
OAI Gateway and the services it can provide.
If you have an OAI Gateway installed in your system, OAI may be optionally enabled in
each Wireless Telephone. You may select whether the Wireless Telephone should
attempt to connect to the SpectraLink OAI Gateway by choosing either the Enable or
Disable options in this menu.
If OAI is enabled, and an OAI IP Address is available to the telephone (either via DHCP
or Static IP configuration), the telephone will communicate with the OAI Server at power
on, and periodically while it is powered on. If you don’t have a SpectraLink OAI
Gateway installed at your site, you should disable the OAI feature to preserve network
bandwidth and battery life.
Admin PW
The Admin PW (password) controls access to the administration functions in the Admin
Menu. The password must be set in each Wireless Telephone for which controlled access
is desired. Wireless Telephones are shipped without any Admin Menu password.
    If you exit with no entry, the password is erased and the display will not
require it before displaying the Admin Menu.