Quick start guide, 1 quick start guide – TDK 3300 ICP User Manual
Page 6
SpectraLink Corporation
Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 ICP and 5220 IP Phone emulation
PN: 72-1084-02-B.doc
Page 6
2.1 Quick Start Guide
1. A wireless LAN must be properly configured and operational through the use of
802.11b wireless access points (APs) listed on the NetLink Wireless Telephone
Access Point Compatibility matrix.
2. A TFTP Server must be available on the network in order to load the appropriate
software into the Wireless Telephones. See the License Management section for
detailed instructions for loading software on Wireless Telephones.
3. The supported Mitel Networks VoIP solution must be connected to your network
and completely operational.
4. The NetLink SVP Server, which facilitates the QoS on the wireless LAN for the
Wireless Telephones, must be on the same subnet as the Wireless Telephones and
have the proper versions of software.
NetLink SVP Server software.
Ensure you have the following versions:
173 svp100.toc
174 zvmlinux
175 flashfs
5. Configure your Wireless Telephone to ensure that it is associated with the
Wireless LAN, has the appropriate software, and has the correct IP Address for
the supported Mitel Networks IP telephony system. See the License Management
section for detailed instructions for loading software onto Wireless Telephones.