TDK 3300 ICP - Manual (Page 20)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 ICP and 5220 IP Phone emulation
PN: 72-1084-02-B.doc Page 20
Noise Mode : provides options that describe the noise level in your environment.
Selecting the correct option will adjust the Wireless Telephone to account for background
noise. Select
Normal : for most office environments; High : for moderate background
noise; or Severe : for extremely noisy conditions. Use of the non-Normal modes is not
recommended unless you are in a loud environment or you may find it difficult to be
heard on your Wireless Telephone.
Alias IP Addr : displays the IP address currently assigned to this Wireless Telephone by
the SVP Server.
Current IP Addr : displays the IP address currently assigned to the Wireless Telephone.
The IP address is not set here, it is merely displayed and may not be changed.
Extension : allows you to enter the user extension for this Wireless Telephone. This
number is for display purposes only, entering it does not assign the extension in the host
telephone system.
Mitel options : displays the ports being utilized for receiving data at the Wireless
Telephone.
Push-to-talk : displays the menu for the two way radio feature in the NetLink i640
Wireless Telephone. The Channel option allows you to select a channel 1-8 to send and
receive radio messages. The Enable/Disable option allows you to enable or disable the
radio feature. See the NetLink i640 Wireless Telephone end user document for more
information about push-to-talk.
(Additional options may be present. Contact your system administrator for information.)