3 solving coverage issues – TDK 3300 ICP User Manual

Page 32

Advertising
background image

SpectraLink Corporation

Setup and Administration—NetLink e340/i640 Wireless Telephone

Mitel Networks 3300 ICP and 5220 IP Phone emulation

PN: 72-1084-02-B.doc

Page 32

• 1b2b5b11b is an example of the data rate that may be displayed

Walk around the site to determine supported data rates, one AP at a time. In any location
you may use the Right Arrow key to display the second best AP, arrow again to the third
best, and so on to the fourth best. The Left Arrow key steps you back to the first best.
Each data rate (1,2,5.5, or 11Mb/s) that is supported by the AP is shown. Those rates that
are in the Basic Rate set (sometimes referred to as “required” rates) are indicated by a ‘b’
following the rate number. The Supported and Basic data rate(s) should be the same on
all APs as is appropriate for your environment.

9.3 Solving Coverage Issues

Coverage issues are best resolved by adding and/or relocating access points.
Overlap issues may be resolved by reassigning channels to the access points or by
relocating the access points.

Advertising