Toshiba PORTEGE M400 User Manual
Page 133
Advertising
3.3 Check of the RAID configuration
3 Tests and Diagnostics
FAIL for one drive is displayed
One drive in the “RAID-1”is failed and degraded. This may look like failure by
wrong operation. Specify the reason by using Independent Utility.
TOSHIBA RAID / RAID Information Display
Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level
Status Capacity
LD0 RAID-1 DEGRADE
xxGB
Write cache
: Enable
Degrade Bootup :
Yes
MBR Protection :
Disable
S.M.A.R.T
:
Enable
Port Assign Status Size Model Rev
0 LD0-0 ONLINE xxGB FUJITSU-----------------
xxxxxxx
1 LD0-1 FAILED xxGB FUJITSU-----------------
xxxxxxx
< RAID: not OPTIMAL >
PORTEGE M400 Maintenance Manual (960-541)
[CONFIDENTIAL]
3-15
Advertising