21 hdd cable, Removing the hdd cable, Installing the hdd cable – Toshiba PORTEGE M400 User Manual
Page 295
Advertising
4.21 HDD cable
4 Replacement Procedures
4.21 HDD cable
Removing the HDD cable
The following describes the procedure for removing the HDD cable. (See Figure 4-38.)
1. Peel off the insulator and disconnect the HDD cable from the connector CN1850 on
the system board.
2. Remove the HDD cable from the slot.
Insulator
HDD cable
CN1850
Figure 4-38 Removing the HDD cable
Installing the HDD cable
The following describes the procedure for installing the HDD cable. (See Figure 4-38.)
1. Install the HDD cable to the slot.
2. Connect the HDD cable to the connector CN1850 on the system board and stick the
insulator.
PORTEGE M400 Maintenance Manual (960-541)
[CONFIDENTIAL]
4-57
Advertising