Toshiba PORTEGE M400 User Manual
Page 256
Advertising
4 Replacement Procedures
4.6 Slim select bay module
2. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2.0×6.0S
BIND
screw
×2
3. Remove the following screw and connector base from the optical drive assembly.
• M2.0×3.0S
S-THIN
HEAD
screw
×1
4. Remove the following screws and ODD side assembly from the optical drive
assembly
• M2.0×6.0S
BIND
screw
×1
• M2.0×22.0S BIND
screw
×1
M2.0
×6.0S BIND
M2.0
×6.0S BIND
M2.0
×3.0S S-THIN HEAD
M2.0
×6.0S BIND
M2.0
×22.0S BIND
ODD side assembly
Connector cover
Connector
Connector base
Figure 4-9 Detaching the optical drive assembly
4-18
[CONFIDENTIAL]
PORTEGE M400 Maintenance Manual (960-541)
Advertising