22 sensor board, Removing the sensor board, Installing the sensor board – Toshiba PORTEGE M400 User Manual
Page 296
Advertising
4 Replacement Procedures
4.22 Sensor board
4.22 Sensor board
Removing the Sensor board
The following describes the procedure for removing the sensor board. (See Figure 4-39.)
1. Remove the sensor board from the slot.
2. Disconnect the sensor cable from the connector on the sensor board.
Sensor board
Sensor cable
Figure 4-39 Removing the sensor board
Installing the Sensor board
The following describes the procedure for installing the sensor board. (See Figure 4-39.)
1. Connect the sensor cable to the connector on the sensor board.
2. Install the sensor board to the slot.
4-58
[CONFIDENTIAL]
PORTEGE M400 Maintenance Manual (960-541)
Advertising