Toshiba PORTEGE M400 - Manual (Page 287)

4.17 Fan 4 Replacement Procedures
4.17 Fan
Removing the Fan
The following describes the procedure for removing the fan. (See Figure 4-31.)
1. Turn over the system board.
2. Peel off the glass tape and disconnect the fan cable from the connector CN8781 on
the system board.
3. Turn the system board face up.
4. Remove the following screws and fan.
• M2.5×4.0B
FLAT HEAD screw
×2
M2.5x4.0B
FLAT HEAD
CN8781
Fan
Fan cable
Glass tape
Figure 4-31 Removing the fan
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] 4-49