Toshiba PORTEGE M400 User Manual
Page 271
Advertising
4.11 Touch pad
4 Replacement Procedures
4. Disconnect the touch pad cable from the connector CN3240 on the system board.
5. Remove the following screws fixing the touch pad assembly.
• M2.0×3.0S
S-THIN HEAD screw
×2
6. Remove the touch pad assembly while peeling the adhered portion.
Touch pad cable
CN3240
Touch pad assembly
M2.0
×3.0S S-THIN HEAD
M2.0
×3.0S S-THIN HEAD
Figure 4-20 Removing the touch pad assembly
PORTEGE M400 Maintenance Manual (960-541)
[CONFIDENTIAL]
4-33
Advertising