Topcom OG-T700 User Manual
Page 18
18
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
4.4.1 Key pressed beeptone on/off
1.
Enter the menu by pressing /OK
2.
Select HANDSET using the up and down
keys
3.
Press OK
4.
Select BEEP using the up
and down
keys
5.
Press OK
6.
Select KEYTONE using the up
and down keys
7.
Press OK
8.
Select ON to activate, OFF to deactivate
9.
Press OK to confirm.
4.4.2 Low battery
Proceed as before, but select at point 6 "LOW BATTERY" instead of "KEYTONE".
4.4.3 Handset out of range
Proceed as before, but select at point 6 "OUT RANGE" instead of “KEYTONE".
4.5
Handset name
This function allows you to personalise each handset.
1.
Enter the menu by pressing /OK
2.
Select HANDSET using the up and down
keys
3.
Press OK
4.
Select NAME using the up and down
keys
5.
Press OK
6.
Enter the name
7.
Press OK to validate
While entering the name, press ‘c’ to delete a character and press and hold
to exit the
menu without taking any modifications into account.
4.6
Changing the PIN code
Certain functions are only available to users who know the PIN code. By default this is PIN
code = 0000.
To change the PIN code:
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select PIN CODE using the up
and down keys
5.
Press OK
6.
Enter the old 4 figure PIN code.
7.
Press OK
8.
Enter the new 4 figure PIN code
9.
Press OK
10.
Enter the new PIN code a second time
11.
Press OK to validate