Topcom OG-T700 - Manual (Page 24)

24 TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
6.3 Setting up a handset on another base
If you want to use a OGATECH OG-T700 handset with a base of another model. The base
must be GAP compatible.
1.
To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 10 from the paragraph 6.1.
6.4 Selecting a base
The handsets can be registered up to 4 bases simultaneously.
To select a base:
1.
Enter the menu by pressing /OK
2. Select REGISTER using the up and down keys
3. Press OK
4. Select SELECT BASE using the up and down keys
5. Press OK
6. Select a base or select AUTO using the up and down keys
7. Press OK
When selecting the base, the currect selected base in indicated by a blinking base number.
If you select ‘Auto’ the handset will automatically search for another base when you are out
of range!
7 Answering Machine
The OGATECH OG-T700 has a built-in digital answering machine with a recording capacity
of 11 min. This answering machine can be controlled by the base only. The answering
machine can be operated remotely and features the possibility of recording two outgoing
messages (Message 1 and Message 2).
An internal voice will state various information, sush as day and time of the call, as well as
settings such as VIP code, ring delay... The language available of the internal voice is
indicated on the packing!
7.1 Settings controlled on the base
Two outgoing messages of 3 minutes can be recorded (OGM1 and OGM2).
•
Outgoing message 1 for the answering function and the possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine (answer only).
All messages and settings are stored on Flash-Memory and will not be
erased when the adapter is unplugged. Only the day/time settings will be
erased.