6managing multiple handsets – Topcom OG-T700 User Manual
Page 22
22
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
3.
Press OK
4.
Select MODIFY ENTRY using the up
and down keys
5.
Press OK
6.
Move through the list of names with the up
and down
keys. The list scrolls in
alphabetical order.
7.
Press OK when you find the name to modify
8.
Use the ‘
’ key to go back and enter the new name
9.
Press OK to validate
10.
Enter the new telephone number
11.
Press OK to validate
5.1.3 Deleting an entry
To delete an entry:
1.
Enter the menu by pressing /OK
2.
Select PHONE BOOK using the up
and down keys
3.
Press OK
4.
Select DELETE ENTRY using the up
and down keys
5.
Press OK
6.
Move through the list of names using the up
and down keys the list scrolls in
alphabetical order.
7.
Press OK when you find the name you wish to delete
8.
CONFIRM appears, press OK to confirm or
to stop.
5.2
Searching a handset from the base
When the paging button
on the base is pressed all the handsets will ring. This ringing will
help you locate a lost handset. By simply pressing one of the handset keys the ringing stops.
6
Managing multiple handsets
6.1
Setting up an additional handset
You can register new handsets on the base if these handsets support the DECT GAP
protocol.
The base can support a maximum of 5 handsets. If you already have 5 handsets, and you
wish to add another one or change one handset, you must first delete a handset, then
associate the new handset.
Warning! If you enter the Phonebook first with the
key and modify a
telephone number with the
key, the modification will be taken into
account only for this call and will not be stored in the phonebook!
You only need to register a 2nd handset in case your 2nd handset does
not link with the base anymore or when you have bought a new one!!!