Topcom OG-T700 User Manual

Page 27

Advertising
background image

TOPCOM OGATECH OG-T700/Twin/Triple/Quattro

27

TOPCOM OGATECH OG-T700/Twin/Triple/Quattro

ENGLISH

7.2.1 Call screening
This function is convenient if you only want to answer certain calls. During incoming call it is
possible to screen the call and hear who is calling if the speaker volume is not set to
minimum. You can hear the outgoing message and the caller who is leaving a message.

7.2.2 Call screening
This function is convenient if you only want to answer certain calls. During incoming call it is
possible to screen the call and hear who is calling if the speaker volume is not set to
minimum. You can hear the outgoing message and the caller who is leaving a message.

7.2.3 Recording a Memo
A memo is considered as an incoming message that can be picked up later by the user. The
max. recording time for a memo is 3 minutes.

Press and hold the

-key. The internal voice will ask you to speak after the tone.

Start speaking after the beep tone.

Release the

-key to stop the memo-recording.

7.2.4 Playback of Incoming Messages and Memos
Press to play all the messages and memos.
Press for 2 sec. to play only the new messages and memos.
For each message, the internal voice announce the day and time when the message was
recorded.
During playback, you can:

Go to the beginning of the current message by pressing

once.

Go to the previous message by pressing

twice.

Stop playback by pressing .

Interrupt playback by pressing . Press again to restart playback.

Go to the next message by pressing

.

7.2.5 Deleting Messages

a. Deleting one by one during playback

Start message playback as explained above.

During playback of the message to be erased starts, press Ø.

The machine will start playing the next message.

If, during pick-up, nothing is said for 8 seconds, the line will be
automatically disconnected.

Due to noise on your telephone line, it’s possible that the device will not
disconnect automatically, but record up to max. 3 minutes. The recording
will be interrupted as soon as you take the line. If the unit continuous
recording, press on the base.

Advertising