TC electronic SDN BHD P2 - Manual (Page 14)

12
FRONT PANEL OPERATION
Lock Recall:
No presets can be recalled via the eight front
panels preset keys and the Wizard function is
also disabled.
Lock Panel:
The entire front panel, recall functions, Bypass
and Card dump functionality is disabled.
Bypass
The function of the front panel BYPASS key is
set via the System Front page on the TC
ICON editor.
Four Bypass modes are available:
• Normal:
No delay in bypass. Dither active.
• Relay:
Bit transparent digital plus analog Bypass
relay.
• Codec:
No delay in bypass.
Bypass is bit transparent.
• Codec Delay:
Delay is active in bypass.
Bypass is bit transparent. The Delay time is
set on the Engine Main page.
Note: If P2 is used with data-reduced signals
such as MPEG, DOLBY E or DTS, use one of
the Codec Bypass modes described above.
It is also possible to lock the front panel
BYPASS key so no unintended bypass can be
performed.