TC electronic SDN BHD P2 - Manual (Page 26)

24
MAIN PAGE
In Gain
Range: 0dB to Off
Separate level controls for Left and Right Input
(A and B).
Phase Inv
Range: Normal/Inverted
Press to phase invert channels A, B or both.
Delay
Range: 0-1000ms
Delay alignment of the Input channels.
Depending on selected Configuration type,
either one common Delay setting or individual
delay settings are available.
Delay Unit
Range: ms, 24fps, 25fps, 30fps
With this parameter it is possible to select
which unit the Delay parameter should be
shown in. Changing this parameter does not
affect the actual delay value.
Lo Cut
Range: Off to 200Hz
Second order LoCut filter on both Inputs.
Hi Cut
Range: Off to 3 kHz
8th order HiCut filter on both Inputs.
Look-ahead Dly
Range: 0-15ms
If the 5 band Compression sections is set to
use a very short Attack times (up to approx 10-
15ms) overshoots may occur. The Look Ahead
function allows the P2 to evaluate the material
just before processing and artifacts can thereby
be prevented.
Be aware that the Look Ahead delay function
actually delays the Output signal.