TC electronic SDN BHD P2 - Manual (Page 25)

23
Fader at right side
No faders
Color Page
Select a color scheme to your liking or make
your own.
I/O PAGE
Input & Clock
Input Select
Range: Analog, Digital
Select appropriate Input type.
Digital Input Select
Range: AES/EBU, S/PDIF
Select type of digital Input format.
Clock Select
Range: Internal 44.1, Internal 48k,
Word Clock, Ext DI
Select to which clock the P2 should sync.
Digital SRC
Range: On/Off
Sets whether the P2 should perform Sample
Rate conversion on the incoming clock or not.
Analog Levels
Analog Scale
Range: -3 to +27dBu @ Full scale
Sets Analog Input sensitivity.
Analog In Offset
Range: -3 to +25dBu @ Full scale
Sets Analog Input level.
Analog Out Offset
Range: -3 to +24 dbu @ Full scale
Adjusts Analog Output gain to match
downstream device.
Digital Level
Digital Out Offset
Range: -12dB to 0dB
The Digital Out Offset parameter controls the
Digital Output level in accordance to the set
Analog Scale Output level.