Netware 3.x/4.x client, Microsoft lan manager – TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA User Manual
Page 30
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
26
!
Netware 3.X/4.X client
Follow these instructions to install the Netware 3.X/4.X client for
your Ethernet Card:
1.
Run the INSTALL program, and select the Netware ODI
Driver.
2.
Follow the instructions on the screen to complete the in-
stallation.
3.
Reboot the computer.
4.
When the computer reboots, log on to the network.
Microsoft LAN Manager
Follow these instructions to install the Microsoft LAN Manager
client for your Ethernet Card:
1.
Run the INSTALL program, and choose LAN Manager.
2.
Type “lmsetup” in the LAN Manager Directory. Press
<Enter>.
3.
Select Network Drivers in “Configuration”. Press <En-
ter>.
4.
Select Add New Configs and then press <Enter>.
5.
Select Other Driver and press <Enter>.
6.
Insert the driver disk into the FDD and click OK.
7.
Select the Network Adapter Driver, PCMCIA 10/100
Mbps Ethernet Card, then click OK.
8.
Press <Spacebar> to select the desired protocol.