TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 32)

28
Chapter 5 Chapter 5 Chapter 5 Chapter 5
Installation for Linux
This section covers the PCMCIA 10/100 Mbps Ethernet Card
driver installation for the Linux environment operating system.
Before you install the PCMCIA 10/100 Ethernet card
Linux driver, you must first configure the PCMCIA
interface in your Linux working environment.
System Requirements
•
Linux kernel version 2.0.x or later
•
PCMCIA interface 3.0.x or later
You can get the latest version of the PCMCIA interface package
from the one of the following URLs:
•
ftp://hyper.stanford.edu/pub/Linux/kernel/pcmcia
•
ftp://sunsite.unc.edu/pub/Linux/kernel/pcmcia
After downloading the PCMCIA interface package, refer to the
PCMCIA-HOWTO file for installation instructions.