TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 35)

31
Appendix A Appendix A Appendix A Appendix A
Troubleshooting
Q&A for Windows environments
These guidelines give you tips to deal with some problems on us-
ing Ethernet Card. If the problems remain unsolved, contact your
dealer for assistance.
Windows 95/98
Problem: Ejecting the card from the PCMCIA socket
hangs or reboots the computer.
Solution: To prevent this phenomenon from occurring,
stop the card by using the PC Card tool in the Control
Panel or the PC Card icon on the taskbar before you re-
move the card.
Problem: The card cannot be detected when reinserted.
Cause: This is caused by certain unstable PCMCIA status
lines when the card is removed and reinserted. The Win-
dows 95/98 drivers may read an incorrect status during
this period of signal instability, and fail to detect the cor-
rect status of the card.
Solution: The card can be detected by clicking “Refresh”
in Device Manager.