TRENDnet 10/100 Mbps Ethernet Card PF-16 PCMCIA - Manual (Page 38)

PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
34

! 
Error Message Solution
[Error 7] “The memory address
specified is invalid. Change
to another one” Valid memory addresses
are D000, D400, D800, and
DC00.
[Error 8] “Enabler has been regis-
tered” The client driver has al-
ready been registered. You
don’t need to install the
client driver again.
[Error 9]
•
“Enabler can’t be
registered as a client”
•
“Can’t map memory”
•
“Configuration can’t be
requested”
These three errors are con-
cerned with Socket and
Card services of the
PCMCIA controller.
Try using another third
party Socket and Card
service that supports this
PCMCIA controller.