TANDBERG Utility - Manual (Page 150)

TANDBERG COMPASS MXP / UTILITY MXP
142
5.1.1 Video
1 Video Input

1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) input
supporting resolutions SVGA (800x600), XGA (1024x768) and SXGA (1280x1024),
analog or digital.
DVI and specifications:
DVI stands for Digital Video Interface, and is a form of video interface technology made to
maximize the quality of flat panel LCD monitors and high-end video graphics cards.
The TANDBERG codec contains a DVI-I plug that can transmit either digital DVI signals or
standard analog VGA signals, depending on what type of monitor is connected.
DVI Specifications
TANDBERG DVI-I follows the VESA Monitor Timing Standard v1.08, also knows as Display
Monitor Timing (DMT).
Analog Horizontal
Frequency Vertical
frequency Pixel
Clock
800x600 @
75Hz 46.875kHz 75.00Hz 49.50MHz
1024x768
@ 60Hz 48.363kHz 60.004Hz 65.00MHz
Digital
800x600 @
75Hz 46.875kHz 75.00Hz 49.50MHz
1024x768
@ 60Hz 48.363kHz 60.004Hz 65.00MHz
Table 6. DVI-I Video resolution supported in F1 and above