Receive a call, 8 receive a call, D call – TANDBERG Utility User Manual
Page 35
3 General Use
27
3.8 Receive a Call
How to answer an incoming call with Auto Answer = ON
If Auto Answer is activated then it is not necessary to lift the handset, the call will
automatically be answered and connected to the built in microphone and speaker, see
for details.
If wishing privacy within an Auto Answered call the user can pick up the handset, which
will automatically switch the system over to the handset microphone and speaker.
How to answer an incoming call with Auto Answer = OFF
To accept incoming calls on either the Compass MXP or the Utility MXP simply lift the
handset.
On the Compass MXP it is also possible to answer by pressing the middle of the five
buttons.
How to reject an incoming call:
To reject an incoming call on the Compass MXP select the Reject icon using the left /
right arrow buttons then press the central button to confirm.
It is not possible to reject a call on the Utility MXP.
Figure 3-8. Answering a call.
When idle, the system will accept all incoming calls as long as Incoming Telephone Calls are set
to On, see
for details.