TANDBERG Utility - Manual (Page 34)

TANDBERG COMPASS MXP / UTILITY MXP
26
3.7 Place a Call
Autodial = ON
If Autodial is activated on either the Utility MXP or Compass MXP then a call can be placed by
simply lifting the handset from the cradle. The unit will then automatically call through the list of
names held in either the Local or Global phone book. If no connection is made after 7 seconds
the unit will proceed to the next name on the list. If the list is emptied without any connection the
system will repeat through the list.
Figure 3-7. Phone Book.
Autodial = OFF
If Autodial is not activated on the Compass MXP then it is possible to place a call using the five
buttons to navigate through the kiosk menu. To place a call on the Compass MXP first select
Place a Call on the main Kiosk Menu using the left / right buttons, then press the central button to
confirm the selection.
Then select the appropriate person or service to call by pressing the up / down buttons, and
center button to confirm the selection.
Selecting and confirming Back will return the user to the main Kiosk Menu.