Appendix 7, Web interface – TANDBERG Utility User Manual
Page 166
TANDBERG COMPASS MXP / UTILITY MXP
158
Appendix 7
Web Interface
It is possible to access and maintain the system remotely via a local area network (LAN) using a
standard Web-browser. Connect your system to a LAN with a Network cable.
How to configure your system for web interface:
1. Open Administrator Settings and choose Network\
LAN Settings
2. Specify IP-assignment DHCP or Static. If DHCP is selected, no other settings are
needed. If Static is selected, IP-address, IP-subnet mask and Gateway must be
specified.
3. Start your Web-browser. In the address field type the IP-address of the system. Enter the
password and the Web-page of the system will be shown. The default password is
TANDBERG.
4. Restart the system. Choose Restart from the Control Panel.
Example:
IP-assignment: Static
IP-address: 196.9.200.129
IP-subnet mask: 255.255.255.0
Gateway: 196.9.200.21