TANDBERG 6000 MXP - Manual (Page 122)

D1335504_T6000_MXP_User_Manual
112
4.1.2 System Name
System Name identifies the system:

On the welcome page.

During an MCU conference call.

When using the Web-interface.

When the codec is acting as an SNMP Agent.

Towards a DHCP server.

H323 ID. Other systems can call in using this name instead of IP-number/IP-address.
System Name is blank by default. System name can be alphanumeric and up to 50 characters
long. Follow the installation procedure to enter a System Name.