TANDBERG 6000 MXP - Manual (Page 26)

D1335504_T6000_MXP_User_Manual
16
2.4 System Configuration
The system must be configured for each installation. Configuration settings can be made via the
system menu. If an external IMUX or non-standard network is being used it may be necessary to
configure any associated external equipment.
Navigate through the menu system using the arrow keys and OK. Remember to press the Save
button on the bottom of each menu to save the changes. Press Cancel (x) to return to the
previous Menu. See
General Use for more information about how to use the menus and the
remote control.
General configuration:
1. Open the General Settings menu
Press OK/Menu to open the Main Menu, if not already displayed. Select Control
Panel - Administrator Settings - General to open the General Settings menu.
2. Language
Press OK in the Language field and select the wanted language from the list.
3. System Name
Enter a name in the System Name field using the number keys on the remote control,
in the same way as with a mobile or cellular phone.
4. Dual Monitor
If using two monitors Dual Monitor should be set to "On". If using one monitor, set
Dual Monitor to "Off".