Inputs, 1 inputs – TANDBERG 6000 MXP User Manual
Page 168
D1335504_T6000_MXP_User_Manual
158
4.5.1
Inputs
Mic 1- 3 and Audio input 4-6
By default, all inputs are enabled. Just plug in an audio source and it is active. Audio inputs that
are On will automatically be mixed. Unconnected inputs will automatically be muted. Select Off to
prevent audio/noise from connected but unused inputs. The activated audio sources are stored
on camera presets.
Mic 1, 2 and 3 are intended for electret type microphones. The microphone inputs are balanced
with 24V phantom power.
Audio input 4 is intended for connection to an external microphone amplifier or an external fixed
mixer. It is crucial that the external mixer is a fixed mixer. Automatic, smart and other types of
adaptive mixers might cause the echo canceller to malfunction.
Audio input 5 is intended for connection to external playback devices or to telephone add-on
hybrids. As there is no acoustic echo canceller on this input it should not be connected to any
microphones. The audio source connected to this input will be heard from the local speaker as
well.
Audio input 6 is intended for connection to a VCR or DVD player. It can also be connected to
other external playback devices. As there is no acoustic echo canceller on this input it should not
be connected to any microphones. The audio entering this input will be heard from the local
speaker as well. If Auto is selected, the audio from the VCR will only be heard when VCR is
selected as video source.
Mix Mode
Auto
The adjustment of each microphone signal is done automatically to obtain the best
possible audio and minimize the background noise.
Fixed
Fixed will maintain a constant weighting of all microphones.
VCR Ducking
If VCR Ducking is activated, the VCR audio level will be attenuated if someone talks into the
microphone or at the far end.
The VCR ducking is only valid for audio input 6. If input 5 and 6 is configured to one stereo input
pair, see
, then the VCR ducking will apply to both input 5 and 6.
Level Settings
It is possible to adjust the audio input levels according to which external audio equipment is
connected. The on-screen audio level indicator will make it easier to set the correct input level