TANDBERG 6000 MXP - Manual (Page 217)

Peripheral Equipment
207
5.1 Interfaces
5.1.1 Video
5 Video Inputs:

2 video inputs supporting S-Video through Mini-DIN connectors.

2 video inputs supporting composite signals through RCA connectors.

1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) input
supporting resolutions SVGA (800x600), XGA (1024x768) and SXGA (1280x1024),
analog or digital.

(use VNC as a 6th video input).
The standard camera uses one of the S-Video inputs.
Levels:

Composite: 1 Vpp, 75 ohm

S-Video (Y/C):

Y: 1 Vpp, 75 ohm

C (PAL): 0.3 Vpp, 75 ohm

C (NTSC): 0.28 Vpp, 75 ohm
The system will automatically adapt to a PAL or NTSC input.
VGA formats supported on 'DVI-I in':
SVGA (800x600) 60Hz, 72Hz, 75Hz, 85Hz
XGA (1024x768) 60 Hz, 70Hz, 75Hz
SXGA (1280x1024) 60Hz
HD720p (1280x720) 50,60 Hz
6 Video Outputs:

2 S-Video outputs, Mini-DIN connectors.

2 composite video outputs, RCA connectors.

2 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) output
supporting resolutions SVGA (800x600) and XGA (1024x768) analog or digital.
The first Mini-DIN connector and the first RCA connector provide main video (incoming/outgoing
video and menus). The two other connectors provide selfview/snapshot/Duo Video. The S-Video
outputs are used by default by the monitors. The outputs are always active. The format of the
output will be either PAL or NTSC depending on your country
’
s standard video format.