TANDBERG 6000 MXP User Manual
Page 15
Introduction
5
The main monitor displays the far-end and near-end videoconferencing sites in addition to the
menus and video from connected video sources. The second monitor displays selfview,
Snapshots and Duo Video.
Note that the TANDBERG 6000 MXP is shipped with different monitors depending on product
variants and which country the system is shipped to. Hence, the pictures/drawings used in this
manual might differ from the actual monitor model shipped with the system.
Codec
The codec is the heart of the system. Its main task is the compression of outgoing video, audio
and data, the transmission of this information to the far end and the decompression of the
incoming information - the name codec comes from a combination of the two words compression
and decompression.
Cabinet
The cabinet is easily movable with large wheels and handles. The codec is located inside the
cabinet. Below the codec is an accessories drawer for storing the remote control, the user manual
and other accessories. Push gently on the drawer and it will pop out. The Digital Natural Audio
Module (DNAM) is mounted above the codec. Below the codec there is room for additional
equipment, e.g. a VCR or DVD player.