True Manufacturing Company TDC-47 - Manual (Page 17)

............ www.truemfg.com ............
True Food Service Equipment, Inc.
15 15
MAINTENANCE, CARE & CLEANING
LIGHT BULB REPLACEMENT:
When replacing the light bulb make sure the light switch
is turned off. (See image 1).
• Hold firmly on the end of the light bulb and pull
toward the center of the cabinet. The lampholders are
spring activated so the bulb
can easily be replaced. (See image 2).
• When installing a new bulb make sure the prongs
at the end of the bulb seat appropriately into the
lampholder.
LIGHT BULB REPLACEMENT FOR TDC MODELS
Light Bulb
Light Switch
Recommended cleaners for certain situations / environments of stainless steel
A) Soap, ammonia and detergent medallion applied with a cloth or sponge can be used
for routine cleaning.
B) Arcal 20, Lac-O-Nu Ecoshine applied provides barrier film for fingerprints and smears.
C) Cameo, Talc, Zud First Impression is applied by rubbing in the direction of the polished lines for
stubborn stains and discoloring.
D) Easy-off and De-Grease It oven aid are excellent for removals on all finishes for grease-fatty acids,
blood and burnt-on foods.
E) Any good commercial detergent can be applied with a sponge or cloth to remove grease and oil.
F) Benefit, Super Sheen, Sheila Shine are good for restoration / passivation.
NOTE: The use of stainless steel cleaners or other such solvents is not
recommended on plastic parts. Warm soap and water will suffice.
STAINLESS STEEL EQUIPMENT CARE AND CLEANING
2
3 1