Tyco Electronics MM23772 - Manual (Page 100)

MM23772, Rev. B
100
10.2.1 Radio Status Icons
Status Icons indicate the various operating characteristics of the radio. The icons show operating modes
and conditions and appear on the third line of the display (see Table 10-1). The battery icon indicates
approximate level only, based on battery voltage.
Table 10-1: Display Descriptions
Steady – “Busy” transmitting or receiving
Steady – special call mode (telephone)
Steady – during all radio transmissions
Steady – transmit at low power
If icon is not visible – transmit at high power
Steady – battery charge indicator
Flashing – Low battery indicator
Steady – Indicates the current channel is set up as an analog channel.
Steady – group or channel in scan list
Steady – priority 2 group or channel
Steady – priority 1 group or channel
Steady (rotates clockwise) – scan mode enabled
If icon is not visible – scan is disabled
Steady – Channel Guard enabled
If icon is not visible – Channel Guard is disabled
10.3 TRI-COLOR LED
Figure 10-5: Tri-Color LED
The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the
radio (see Figure 10-5). The three colors of the LED and the status they represent are: