28 dynamic regrouping, 29 gps coordinates – Tyco Electronics MM23772 User Manual

Page 47

Advertising
background image

MM23772, Rev. B

47

7.28 DYNAMIC REGROUPING

Dynamic regrouping requires that the network administrator determine which radio users should be
formed into an impromptu talk group to respond to particular emergency conditions.

The administrator will edit the personalities of the affected radios to include an emergency profile and
then page the affected radios to re-register with the network to receive their edited personalities.

In response, affected radios automatically re-register to receive their edited personalities. During re-
registration, subscriber equipment will default to the emergency profile selected by the administrator.

7.29 GPS COORDINATES

The radio’s current latitude and longitude coordinates may be displayed using the “GPS” menu. The
following procedure assumes a GPS antenna is connected to the radio and it is receiving adequate signals
from GPS satellites:

1. Press

or

until the “GPS” menu appears in the display. Current GPS coordinate latitude and

longitude data continuously scrolls in the top line of the display in a degrees:minutes:seconds format.

2. Press

or

to change to another menu.

If the internal GPS receiver’s data is expired (30 minutes or more) or unavailable, the radio
uses the serving base station’s coordinates [GPS (Site) is displayed]. The GPS Menu will
also indicate if the data is aged (2 minutes or more) [GPS (Aged) is displayed]

Advertising