4 tri-color led, 5 status messages – Tyco Electronics MM23772 User Manual

Page 83

Advertising
background image

MM23772, Rev. B

83

9.4 TRI-COLOR

LED

Figure 9-5: Tri-Color LED

The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the
radio (see Figure 9-5). The three colors of the LED and the status they represent are:

Green:

Receiving

Red:

Unencrypted

transmission

Orange:

Encrypted transmission

9.5 STATUS

MESSAGES

During radio operation, various radio Status Messages can be displayed. The messages are described
below.

MESSAGE NAME DESCRIPTION

TALKARND

Talkaround

Indicates the radio is operating on conventional channels in talkaround
mode (no repeater).

LOW BATT

Low Battery

Battery voltage has dropped to the point to where the radio is no longer
able to transmit. The radio still receives calls until the battery is
discharged beyond the point of operation, at which time the radio
automatically shuts down.

RXEMER

Receive
Emergency

Indicates an emergency call is being received. This message flashes on
line two.

TXEMER

Transmit
Emergency

Indicates an emergency call has been transmitted on this radio. This
message flashes on line two.

WHC

Who Has
Called

Indicates an individual call has been received, but not responded to. The
indicator turns OFF if the individual call mode is entered, the system is
changed, or the radio is turned off and then on again.

UNKNOWN

Unknown ID

Indicates an individual call is being received from an unknown ID.

Advertising