Tyco Electronics MM23772 - Manual (Page 86)

MM23772, Rev. B
86
4. Press  once to add as a normal group or channel.
5. Press  twice to add as a Priority 2 group.
6. Press  three times to add as a Priority 1 group.
7. Press  to re-start scanning.
9.9.2 P7250 Scan Model
1. Press  to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press  once to remove group or channel from the list.
4. Press  once to add as a normal group or channel.
5. Press

twice to add as a Priority 2 group.
6. Press  three times to add as a Priority 1 group.
7. Press

to re-start scanning.
9.10 NUISANCE DELETE (SYSTEM MODEL)
A channel can temporarily be deleted from the scan list if it is not the currently selected channel.
1. Turn Scan ON.
2. When the radio receives a call on the channel, press the  . The channel is removed from the scan
list until the radio is power cycled.
9.11 BACKLIGHT ON/OFF
1. Press  to access the menu.
2. Press  or  to scroll through menu until “BCKLGHT” appears.
3. Press  to select Backlight menu.
4. Press  or  to toggle backlight ON and OFF.
5. Press  to select new backlight setting.
9.12 CONTRAST ADJUST
1. Press  to access the menu.
2. Press

or

to scroll through menu until “CONTRAST” appears.
3. Press  to select Contrast menu.
4. Press

or

to adjust contrast setting from 1 - 4.
5. Press  to select new contrast setting.