Breadman BREAD BAKER TR520 - Manual (Page 23)

21
USER MAINTENANCE
INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it
yourself. Any servicing requiring disassembly must be performed by a qualified appliance repair
technician.
CLEANING
ALWAYS UNPLUG THE UNIT AND ALLOW TO COOL COMPLETELY BEFORE CLEANING.
Never use vinegar, bleach, or harsh chemicals to clean your Bread Maker.
1. Unplug and allow to cool before cleaning.
2. Bread Pan & Kneading Blade
Remove bread pan from inside the baking chamber and remove the kneading blade from the
bread pan. Wash the bread pan (inside and out) and kneading blade with warm soapy water,
but DO NOT IMMERSE THE BREAD PAN IN WATER OR PUT IT IN A DISHWASHER. If the
kneading blade is stuck to the drive shaft, fill the bread pan with warm, soapy water and let it
stand for up to 30 minutes until loosened (any longer may damage the non-stick surface). DO
NOT USE EXCESSIVE FORCE.
Do not use steel wool, abrasive cleaners, or metal utensils on the bread pan or kneading blade as
they will damage the non-stick surface. Normal wear is to be expected. The non-stick surface
may discolor over time and in no way affects performance.
3. Exterior
Clean the exterior of the Bread Maker with a damp cloth and plastic scouring pad if necessary.
Do not rub too hard as the surface may be scratched.
4. Interior
Wipe the inside of the baking chamber with a slightly damp cloth or sponge. A plastic scouring
pad may be used if necessary. Do not rub too hard or the surface may be scratched. Never pour
water, solvents or cleaning solutions into the baking chamber.
5. Glass Lid
To clean the glass in the lid, use a glass cleaner or mild detergent and a damp cloth or plastic
scouring pad. Do not use an abrasive cleaner or pad as they might scratch the glass. If necessary,
the lid may be removed for more extensive cleaning. DO NOT PUT THE LID IN A
DISHWASHER OR SOAK IT IN WATER.
6. Make sure that all removable parts have been thoroughly cleaned and dried before storing.
STORING
All removable parts should be thoroughly cleaned and dried before storing. Reassemble the unit so
that the kneading blade is inside the bread pan, and the bread pan is inside the baking chamber.
Store the Bread Maker with the lid closed.
Breadman_TR520_IB_23-3-07 3/23/07 2:44 PM Page 23