True Fitness Z7 Series - Manual (Page 48)

Z 7 Tr e a d m i l l O w n e r ' s G u i d e 64
C
AR
E
AND
M
AIN
TENANC
E
Your TRUE Z-Series treadmill is equipped with built in diagnostic capabili-
ties to assist in configuring, maintaining and servicing your treadmill. The
Field Diagnostic mode provides total hours, distance, average speed, ability
to change the units of measure, ability to set the “user not present” func-
tion, a list of service and error codes, the ability to set program time, and a
log of the last five errors.
NOTE: Messages appear in the Message Center on the Z7.
1. Hold the (minus/plus) while placing the Safety Key on the Keyboard.
The following messages will repeat themselves:
DIAGNOSTIC
PRESS START
2. Press (up arrow) to display total hours.
The following messages will display:
HOURS No. of hours on the treadmill
3. Press (up arrow) to display total distance.
The following messages will display:
DISTANCE No. of miles on the treadmill
4. Press (up arrow) to display average speed.
The following messages will display:
AVG SPEED Average speed on the treadmill
5. Press (up arrow) to display units. Press (plus) or (minus) to toggle.
The following messages will display:
UNITS ENG or MET
D
IAGNOSTICS
Diagnostics
C
ARE AND
M
AINTENANCE