Figure 7.1, Serial session/version id screen, Back to table of contents – Tut Systems XL-12000S User Manual
Page 20
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
12
TUT SYSTEMS
7.0 CONFIGURE THE MODEM
a.
From the Windows 95/Windows 98 screen select “Start.”
b.
Select “Programs” (or Open file Hypertrm.exe).
c.
Select “Accessories.”
d.
Select “HyperTerminal.” When the HyperTerminal icon
appears, double-click on it.
e.
On the Connection Description icon, assign a name (e.g.
Modem1) to the icon for future purposes. Press “OK”.
(When Phone Number tab appears, press “Cancel”.)
f.
Select File / Properties: Press the <Configure> button on
the Properties screen.
g.
Select the COM port (e.g. COM1) number that you will be
connecting to and set the following parameters:
•
9,600 baud
•
No-parity
•
8 data bits
•
1 stop bit
•
None
Press “OK”.
h.
Under the File / Properties/ Settings: Set Function, Arrow,
and Ctrl keys to act as Terminal Keys, Emulation - Auto
detect. Backscroll buffer lines - 500. Press “OK”.
i.
Set hardware flow control to none. You can set the display
window to full screen size to avoid cutting off a section of
the display.
j.
Do a File/Save As with a meaningful file name to save this
configuration if you intend to use this PC and serial connec-
tion in the future.
k.
Connect the user-provided straight-through serial cable to
locally connect your PC to the modem (see section 4.0
Installation for more information).