Figure 7.6, Bridge non-ip, Back to table of contents – Tut Systems XL-12000S User Manual
Page 32
Figure 7.6 Bridge Non-IP
The configuration used for the modems in “Bridge Non-IP” example:
For Modem 1:
The “LAN IP address” field in the Modem Configuration screen will
be set to 192.168.2.2
The LAN “Subnet Mask” field in the Modem Configuration screen
will be set to 255.255.255.0
The “DSL IP address” field in the Modem Configuration screen will
be set to 192.168.3.1
The DSL “Subnet Mask” field in the Modem Configuration screen
will be set to 255.255.255.0
The “Master/Slave” field in the Modem Configuration screen will be
set to Master.
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
24
TUT SYSTEMS
7.0 CONFIGURE THE MODEM
Ethernet Hub
192.168.2.2
(LAN)
192.168.3.1
(DSL)
192.168.3.2
(DSL)
Apple Printer
PC
PC
Mac
Modem 1
T
UT
S
YSTEMS
Modem 2
T
UT
S
YSTEMS
Ethernet Hub
192.168.4.1 (LAN)