Tut Systems XL-12000S - Manual (Page 6)

Figures
Figure 4.1 RJ-45 10Base-T Straight-through Cable 4
Figure 4.2 RJ-11 DSL Line Cable 5
Figure 4.3 XL-12000S Installation with a Hub or Node 6
Figure 5.1 XL-12000S Front Panel 8
Figure 5.2 XL-12000S Rear Panel 9
Figure 7.1 Serial Session/Version ID Screen 13
Figure 7.2 Bridging Example One (Basic Bridging) 15
Figure 7.3 Bridging Example Two (Advanced Bridging) 17
Figure 7.4 Routing Example One 20
(Using a Router and Bridge Combination)
Figure 7.5 Routing Example Two 22
(Using a Router and Router Combination)
Figure 7.6 Bridge Non-IP 24
Figure 7.7 Serial Session/Version ID Screen 30
Figure 7.8 Login Display Screen 31
Figure 7.9 Main Menu Screen 32
Figure 7.10 Modem Management Screen 33
Figure 7.11 Modem Configuration Screen 36
Figure 7.12 Password Change Screen 39
Figure 8.1 SNMP Management Screen 42
Figure 8.2 DHCP Relay Agent Screen 43
Figure 8.3 Upgrade Software Screen 46
Figure 9.1 Modem Status Screen 48
Figure 9.2 Modem IP Packet Statistics Screen 50
Figure C.1 Using an Ohmmeter to Measure the Length of Phone Wire 65
iv TUT SYSTEMS
XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
Back to Table of Contents