Tut Systems XL-12000S - Manual (Page 35)

XL-12000S
MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE
7.0 CONFIGURE THE MODEM TUT SYSTEMS 27
is replaced with “Set Succeeded” or “Set Failed.” If invalid data is
present in an input field, the system issues an error message and does
not accept any data changes until the error is corrected. If changes
have been made to fields that are marked with an (*), the modem
will reboot when <Enter> is pressed.
XL-12000S Keyboard Commands
<Ctrl- > followed by a letter, such as <Ctrl-X >, means you that
press and hold the Control key while pressing the letter key.
Table 7.1 Keyboard Commands
KEY DESCRIPTION
<Ctrl-D> Deletes the character that the cursor is on
(forward delete).
Backspace & Delete Deletes the character before the cursor.
Character Overstrike Typing a character replaces the character that was there.
No Insert Mode If you delete a character, it moves the remaining
characters to the left; there is no way of moving them
to the right.
<Ctrl-A> Takes you to the beginning of the current field.
<Ctrl-E> Takes you to the end of the current field.
<Ctrl-W> Clears the active input field.
<Ctrl-L> Refreshes the screen.
<Tab> Moves the cursor to the beginning of the next field.
<Esc> <Tab> Moves the cursor to the beginning of the previous field.
<Ctrl-X> Returns to Main Menu without saving changes.
Enter Accepts all changes made on the screen. The operator
will remain on the screen unless a field marked with an
“*” has been changed. In this case the modem will
reboot.
Arrow Keys: Moves the cursor left within the field or if at the end of
Left arrow or <Ctrl-B> the field moves cursor to the end of the previous field.
Right arrow or <Ctrl-F> Moves the cursor right within the field or if at the end
of the field moves the cursor to the beginning of the
next field.
Up arrow or <Ctrl-P> Moves to the closest available position on the line above.
Down arrow or <Ctrl-N> Moves to the closest available position on the line below.