Unitech ENTERPRISE PA500 - Manual (Page 11)

Chapter 1 Getting Started
5
Setting up the PA500
Perform the following easy set up tasks to begin using your device:
• Install the battery pack
• Charge your device
• Power on the PA500
Installing the Battery
WARNING!
There is a risk of fire and burns if the battery pack is handled
improperly. DO NOT disassemble, crush, puncture, short external
contacts, or dispose the battery pack in fire or water. DO NOT attempt
to open or service the battery pack. Dispose of used batteries
according to local recycling guidelines in your area.
A backup battery cell is embedded into your device to prevent data loss in instances when the
removable battery pack is removed or completely discharged. This backup battery cell retains data for
60 minutes after which you risk loosing all data on the internal memory of your device.
NOTE:
To enable the internal battery cell to provide backup power supply, charge your device
with the main battery pack for at least three and a half hours.
1. Position the battery pack, making sure the battery pack fits the shape of the battery
compartment.
2. Slide the battery pack into the battery bay. The battery pack locks to the chassis with an audible
click.