Unitech ENTERPRISE PA500 - Manual (Page 13)

Chapter 1 Getting Started
7
To charge the device using the docking station:
1. Plug the AC adapter cable into the power jack on the docking station.
2. Plug the AC adapter into an electrical outlet.
3. Slide the device into the docking station until it clicks into place.
The connection is secure when the bottom edge of the device is aligned smoothly with the
docking station, and the LED indicator on the docking station and device lights up red.
LED status during charging:
– Solid red: Charging
– Solid green: Charging complete
If the battery level becomes low in the course of normal use, a status icon appears on the
device screen indicating low or very low battery status. In both cases, perform an
ActiveSync operation to back up your data, then recharge your device as soon as possible.
If the battery level reaches low status, the device will enter
sleep mode ; if the battery level
reaches very low status, the device will enter deep sleep mode . In this case, you have about
72 hours to recharge your device after which you risk losing all data on your device’s internal
memory.